This Harbo 3m Round Cantilever Aluminium Crank Garden Parasol is made to a very high specification. The frame is made from Aluminium and the Parasol Canopy is manufactured from 230 gram spun Polyester; both these materials are ideal for designing garden parasols. The Cantilever Parasol is also known as an Overhanging Parasol or Banana Parasol.

All fixtures and fittings are Aluminium and Plastic. The Crank rope is made from an Anti-Fray 1cm thick Black colour rope. The Parasol pole separates near the bottom of the stem to make it easy to store. We have also extended the length of the connector to give extra strengh to the frame and ensure it does not wobble in the middle.There is a simple Push Pin mechanism which allows you to separate the poles. The cross section foot support also unscrews to allow for easy storage.

We strongly recommend that this Cantilever Parasol is weighed down with at least 50kg but to ensure it does not blow over in strong winds a 100kg will be required. You can purcahse paving slabs to weigh down the parasol and if you would like to make the base look more attractive lay Granite Slabs over the top of the paving slabs.

The Parasol Canopy on this 3m Cantilever Garden Parasol is removable and machine washable at 40oC. The Polyester fabric is inherently fade, rot, shrink, crumple and stain resistant.

We recommend this garden parasol is stored in a dry and safe environment throughout the winter months, this will ensure your parasol stays in good condition.

This garden parasol has a 48mm pole.

Please note:
This product does not come with the base as shown in the photo; these bases can be added to your order - see related products on the right of this page.

Dimensions:

Parasol Width - 300cm (118")
Parasol Pole Width - 48cm (19")
Number of Ribs - 6 Ribs
Rib Spec - 12mm x 18mm